`T.D.S. - N.C. PUTTY

TYPE – Based on High quality Nitrocellulose Resins and Fillers.

RECOMMENDED USE – It is used on Automobiles and Industrial Metal products compatible with several finishes e.g. NC , Acrylic, Polyurethane & Synthetic Enamels etc.

PROPERTIES :
1. COLOUR : Grey
2. CONSISTENCY : Thick Paste, Flowing type
3. FINISH : Smooth & Matt
4. DRYING : Surface Dry- 5 minutes
    Tack Free Dry- 45 minutes
    Hard Dry- Overnight
5. RECOATING AFTER : Minimum 2 hours , Maximum Overnight
6. APPLICATION : By Putty Knife
7. RECOMMENDED DFT : Max 0.06 to 0.08 mm per coat
8. REDUCER : NCT-2
9. COMPATIBLE FINISHES : N.C. Based finishes & Synthetic finishes

Remarks : Allow 15 minutes between two coats of N.C.Putty
Apply in thin coats to achieve better filling and adhesion to avoid cracking

Packing : 25kgs., 5Kgs, 1.2Kgs,1kg, 875gms, 500gms and 200gms.